Home >> New Design >> TE70TXT,
TE80TXT, TE90TXT, TET100XT Hydraulic Bed Tilt and Low Load Angle
Tail Trailers
Model HT Walk Thru (3:58 minutes)
Click to start
Model HT Controls Operation (2:51 minutes)
Click to start
Model HT Mid-Deck Operation (1:10 minutes)
Click to start
Model HT Flip Tail Operation (2:40 minutes)
Click to start
General Specifications:
TE70TXT
70,000 Lb. Distributed
40,000 Lb. Concentrated in 10'
50,000 Lb. Concentrated in 16'
TE80TXT
80 Lb. Distributed
50,000 Lb. Concentrated in 10'
60,000 Lb. Concentrated in 16'
TE90TXT
90,000 Lb. Distributed
60,000 Lb. Concentrated in 10'
TE100TXT
100,000 Lb. Distributed
70,000 Lb. Concentrated in 10'
Dimensions:
Overall Length:
40' to 53'
Main Deck Length:
22'-3" to 35'-3"
Upper Deck Length:
8'
Slope:
2'-2"
Hydraulic Tail:
11'-3"
Flip Under Ramp:
5' allows 10 degree
load angle
Deck Width:
8'-6"
Frame:
All hi-tensile steel. Custom manufactured beams designed for stress loads at
a minimum of two times rated capacity. Scissor type neck allows for full
tilt bed. Platform: 1-1/2" Oak decking. 1/4" Steel tread plate coveres the
wheel area and over flip tail. Axles:
(2) 22,500 Lb. Capacity with oil seal hubs. Brakes: 12-1/4" x 7" Air. Outboard drums with ABS, auto slack adjusters
and spring brakes. Wheels:
(8) 6.75 x 17.5 Disc wheels. Tires:
(8) 235/75R x 17.5 Radials. Landing Gear: Pin drop.
Suspension: Air ride with drump valve mounted by controls.
Tie Downs : D-rings, stakepockets or Gotcha's on 4' centers.
Storage: 1 Tool box with lid located upper deck driver's side front of
trailer. Electrical:
ICC DOT Standard sealed beam light with mid-ship turn signal. Winch: 12,000 Lb. Mounted front center of upper deck. Controls are located
on driver's side of upper deck.
Paint: Polyurethane primer and paint after sandblasting.
Warranty: Limited 5 Year Pro-Rated Major Structural Warranty (USA and
Canada ONLY). Options: Many options available.
Please call 1-800-232-5682 or e-mail
sales@traileze.com for more information on options.
Due to the constant
improvements in our products, the designs, materials and specifications
are subject to change without notice.